Freeze Drying Chambers and Equipment
Chemglass Life Sciences Drying Apparatus, Abderhalden, Complete, 740mm Height x 350mm Width
Drying Apparatus, Abderhalden, Complete, 740mm Height x 350mm Width. Abderhalden style for drying samples at a temperature as a function of the solvent boiling point. The desiccant flask has a 34/45 outer joint for connection to the drying chamber. All other joints are 24/40. Complete apparatus consists of a desiccant flask, drying chamber, round bottom flask and Allihn condenser.
Clearco Products Co Inc Standard Viscosity Silicone Fluid, 100cSt, 5 gal
Standard Viscosity Silicone Fluid, 100cSt, 5 gal.
Norell Inc 5mm, 500MHz 7" VALVED MEDIUM WALL NMR TUBE FOR INTERMEDIATE PRESSURE 1 Tube per pack
These pressure tubes facilitate experiments requiring conditions such as pressurized inert atmosphere blanketing, addition of reactive gaseous reagents under pressure, containment of low boiling point solvents or samples at elevated temperatures, and so on.We recommend that the maximum operating pressure should be limited to 600 kPa (6 bar, 87 psi) when using a thin wall pressure tube, up to 1200 kPa (12 bar, 175 psi) if using a heavy wall pressure tube. (Please see accompanying table for complete details).
Airfiltronix Corp MANIFOLD ONLY FOR 20-POSITION
Manifold only for 20-position evaporatorGLAS COL LLC
Bellco Glass, Inc. Welded, 316l stainless steel construction, 1/4" inch od tubingElectropolished finish, continuous seal weldThree port model features siphon, fill and vent tubes45mm polypropylene screw cap and silicone gasket includedCap slug: 45mmTube specifications:
Welded, 316l stainless steel construction, 1/4" inch od tubingElectropolished finish, continuous seal weldThree port model features siphon, fill and vent tubes45mm polypropylene screw cap and silicone gasket includedCap slug: 45mmTube specifications:
Bellco Glass, Inc. 316-l stainless steel ra32 or better finish10 micron porosity stainless steel frit for low profile vertical side arm vessels.Frit is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasketTriple tube configuration wi
316-l stainless steel ra32 or better finish10 micron porosity stainless steel frit for low profile vertical side arm vessels.Frit is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasketTriple tube configuration wi
Bellco Glass, Inc. Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube Thermowell assembl
Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube Thermowell assembl
Bellco Glass, Inc. Size: for 6l low profile over head drive vesselDimensions: 14" oal with compression fitting & capPaddle size: 3" tall x 7" wide low profile impeller assembly
Size: for 6l low profile over head drive vesselDimensions: 14" oal with compression fitting & capPaddle size: 3" tall x 7" wide low profile impeller assembly